DS4000 Series DSO Option Codes: Licence Code String is in the following format: LLLLLLL-RLGLLDS-****LLL-LLLLLLL ABCD A B C D 54321 54321 54321 54321 Bits 00000 00000 00000 00000 x0000 00000 00000 00000 0 = Official, 1 = Trial 0x000 00000 00000 00000 must = 0 00x00 00000 00000 00000 See Note(2) 000x0 00000 00000 00000 Option Bank Selection 0000x 00000 00000 00000 Option Bank Selection 00000 x0000 00000 00000 Licence re-application bit 00000 0x000 00000 00000 must = 0 00000 00x00 00000 00000 must = 0 00000 000x0 00000 00000 must = 0 00000 0000x 00000 00000 must = 0 00000 00000 x0000 00000 must = 0 00000 00000 0x000 00000 must = 0 00000 00000 00x00 00000 See Note(2) 00000 00000 000x0 00000 See Note(2) 00000 00000 0000x 00000 See Note(2) 00000 00000 00000 x0000 FlexRay Decode or alternate option 00000 00000 00000 0x000 CAN Decode or alternate option 00000 00000 00000 00x00 I2C Decode or alternate option 00000 00000 00000 000x0 SPI Decode or alternate option 00000 00000 00000 0000x RS232 Decode or alternate option More Detailed description of Bits: A - Control Bits 1. Option bank selection: Available options =1 (if = 1 then A.2 should = 0) 2. Option bank selection: Alternate options =1 (if = 1 then A.1 should = 0) 3. See Note(2) 4. Must = 0 5. Trial = 1, See note(1) : Official = 0 B - Control Bits 1. Must = 0 2. Must = 0 3. Must = 0 4. Must = 0 5. Alternating bit allows re-installation of the same licence, without uninstalling it (indicates "Option Installed!) C - Control Bits 1. See Note(2) 2. See Note(2) 3. See Note(2) 4. Must = 0 5. Must = 0 D - Options (0 = OFF, 1 = ON) 1. RS232 Decode 2. SPI Decode 3. I2C Decode 4. CAN Decode 5. FlexRay Decode Alternate Options (when A.1 =0 && A.2 =1) 1. Reserved (Empty Option) 2. Reserved (Empty Option) 3. Reserved (Empty Option) 4. Reserved (Empty Option) 5. Reserved (Empty Option) Notes: (1) Re-applying the same trial licence will extend the trial time by an additional 1932 minutes to a maximum time of 5796 minutes. (2) If any one of these bits are = 1, then re-applying the same licence will result in the error "Licence Unavailable!" If all of these bits are = 0, then re-applying the same licence will result in the message "The Option Has Been Installed!" or, in the case of a trial licence with maximum time reached, the message "Time Trial is Arrived!" To work out the option code, use the following bit-to-code conversion table: A = 00000 B = 00001 C = 00010 D = 00011 E = 00100 F = 00101 G = 00110 H = 00111 J = 01000 K = 01001 L = 01010 M = 01011 N = 01100 P = 01101 Q = 01110 R = 01111 S = 10000 T = 10001 U = 10010 V = 10011 W = 10100 X = 10101 Y = 10110 Z = 10111 2 = 11000 3 = 11001 4 = 11010 5 = 11011 6 = 11100 7 = 11101 8 = 11110 9 = 11111 Eg. A) Option code to install SPI and FlexRay Decode Trial Options: 10001 00000 00000 10010 = T A A U LLLLLLL-RLGLLDS-TAAULLL-LLLLLLL B) Option code to install all 5 official options: 00001 00000 00000 11111 = B A A 9 LLLLLLL-RLGLLDS-BAA9LLL-LLLLLLL